A69-1418 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

A69-1418: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 7-4/5, inside_diameter: 0.327 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN, style_designator: CYLINDRICAL, spring_free_length: 0.727 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-527-2989, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

A69-1418

NSN: 5360-00-527-2989
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 15605 — EATON CORP OPNS & TECHNICAL CENTER (USA)

SPECIFICATIONS

material	STEEL COMP 302 OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity	7-4/5
inside_diameter	0.327 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
style_designator	CYLINDRICAL
spring_free_length	0.727 INCHES NOMINAL IN
spring_solid_length	0.250 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_deflection_rate	3.600 POUNDS PER INCH MINIMUM AND 4.400 POUNDS PER INCH MAXIMUM LBS
spring_free_outside_diameter	0.387 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN
material_document_and_classification	MIL-S-5059,ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5360-00-527-2989

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.387 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

SPRING SOLID LENGTH: 0.250 INCHES NOMINAL IN

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 0.727 INCHES NOMINAL IN

•

SPRING DEFLECTION RATE: 3.600 POUNDS PER INCH MINIMUM AND 4.400 POUNDS PER INCH MAXIMUM LBS

•

INSIDE DIAMETER: 0.327 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.387 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
SPRING SOLID LENGTH	0.250 INCHES NOMINAL IN
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059,ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	0.727 INCHES NOMINAL IN
SPRING DEFLECTION RATE	3.600 POUNDS PER INCH MINIMUM AND 4.400 POUNDS PER INCH MAXIMUM LBS
INSIDE DIAMETER	0.327 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
COIL QUANTITY	7-4/5
COIL HELIX DIRECTION	RIGHT-HAND OR LEFT-HAND

SUBSTITUTES & CROSS-REFERENCES 1

69-1418Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy A69-1418?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is A69-1418?

A69-1418 is a SPRING,HELICAL,COMPRESSION.

What parts can replace A69-1418?

There is 1 known substitute for A69-1418: 69-1418. Substitute compatibility should be verified for your specific system.

What is the NSN for A69-1418?

A69-1418 is cataloged in the U.S. Government catalog under NSN 5360-00-527-2989. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

A69-1418 — SPRING,HELICAL,COMPRESSION

Request a Quote — A69-1418