PartsTable
Technical Data Sheet
Download PDF

A6732-4-02 — NUT,CLIP ON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

A6732-4-02: NUT,CLIP ON.

The NUT,CLIP ON is a the manufacturer industrial component. Key specifications include general_characteristics_item_description: STEEL,CADMIUM AND CHROMATE OVERALL PER QQ-P-416,TY 2,CL 3,0.190-32 UNF 3B RH THREAD,0.500 IN. NOM OVERALL WIDTH IN.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-134-3926, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A6732-4-02
NSN: 5310-00-134-3926
NIINs: 001343926, 011454686
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
general_characteristics_item_descriptionSTEEL,CADMIUM AND CHROMATE OVERALL PER QQ-P-416,TY 2,CL 3,0.190-32 UNF 3B RH THREAD,0.500 IN. NOM OVERALL WIDTH IN
NSN5310-00-134-3926
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A6732-4-02 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
PANEL THICKNESS: 0.219 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
DISTANCE FROM BASE TO CENTER OF APERTURE0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
PANEL THICKNESS0.219 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.190 INCHES IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
NUT STYLEFLOATING
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 2
11727730Reference document
Same NSN cross-reference
Reference document — Secondary reference
A6732-4-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A6732-4-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A6732-4-02?
A6732-4-02 is a NUT,CLIP ON.
What parts can replace A6732-4-02?
There are 2 known substitutes for A6732-4-02: 11727730, A6732-4-3. Substitute compatibility should be verified for your specific system.
What is the NSN for A6732-4-02?
A6732-4-02 is cataloged in the U.S. Government catalog under NSN 5310-00-134-3926. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A6732-4-02

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.