PartsTable
Technical Data Sheet
PartsTable / O-RING / A6689.134.222
A6689.134.222 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The A6689.134.222 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-480-4733, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A6689.134.222
NSN: 5331-00-480-4733
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part NumberA6689.134.222
NSN5331-00-480-4733
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A6689.134.222 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 2.047 INCHES MINIMUM AND 2.089 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
•
CENTER HOLE DIAMETER: 1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER2.047 INCHES MINIMUM AND 2.089 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
CENTER HOLE DIAMETER1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
2-134E540-80Interchangeable
interchangeable cross-reference
interchangeable
CAT. ORD. 5700Interchangeable
interchangeable cross-reference
interchangeable
2-130 E540-80Interchangeable
interchangeable cross-reference
interchangeable
27200Interchangeable
interchangeable cross-reference
interchangeable
150B23980Interchangeable
interchangeable cross-reference
interchangeable
J120Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A6689.134.222?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A6689.134.222?
A6689.134.222 is a A6689.134.222.
What parts can replace A6689.134.222?
There are 31 known substitutes for A6689.134.222: 2-134E540-80, CAT. ORD. 5700, 2-130 E540-80 and 28 more. Substitute compatibility should be verified for your specific system.
Is A6689.134.222 still available?
A6689.134.222 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A6689.134.222

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026