PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A6472U
A6472U ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN, overall_width: 1.0525 INCHES MINIMUM AND 1.0725 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: UNGROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-603-1730, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A6472U
NSN: 3110-00-603-1730
FSC: 3110
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN
overall_width1.0525 INCHES MINIMUM AND 1.0725 INCHES MAXIMUM IN
seal_quantity1
load_directionRADIAL
surface_finishUNGROUND
shield_quantity2
outer_ring_width0.8025 INCHES MINIMUM AND 0.8225 INCHES MAXIMUM IN
special_featuresSPLIT OUTER RING
bearing_seal_typeLABYRINTH
lubrication_materialOIL
NSN3110-00-603-1730
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A6472U · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: LABYRINTH
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
•
SURFACE FINISH: UNGROUND
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL: OIL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.0525 INCHES MINIMUM AND 1.0725 INCHES MAXIMUM IN
BEARING SEAL TYPELABYRINTH
LOAD DIRECTIONRADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE FINISHUNGROUND
BORE SHAPESTRAIGHT
SPECIAL FEATURESSPLIT OUTER RING
LUBRICATION MATERIALOIL
SHIELD QUANTITY2
SEAL QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
60456Interchangeable
interchangeable cross-reference
interchangeable
A6031Interchangeable
interchangeable cross-reference
interchangeable
A6013Interchangeable
interchangeable cross-reference
interchangeable
CS1881Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A6472U?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A6472U?
A6472U is a BEARING,BALL,ANNULAR.
What parts can replace A6472U?
There are 4 known substitutes for A6472U: 60456, A6031, A6013 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A6472U?
A6472U is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-603-1730. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A6472U

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026