PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A615-7
A615-7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CONE,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include color: BEIGE, material: COTTON AND PLASTIC POLYESTER OVERALL, usage_design: THUMB AND WRIST, overall_width: 1.500 INCHES NOMINAL IN, overall_height: 0.188 INCHES NOMINAL IN, overall_length: 7.750 INCHES MINIMUM AND 8.500 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0631, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A615-7
NSN: 3110-00-100-0631
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
colorBEIGE
materialCOTTON AND PLASTIC POLYESTER OVERALL
usage_designTHUMB AND WRIST
overall_width1.500 INCHES NOMINAL IN
overall_height0.188 INCHES NOMINAL IN
overall_length7.750 INCHES MINIMUM AND 8.500 INCHES MAXIMUM IN
usage_locationLEFT WRIST
corner_cut_width0.250 INCHES NOMINAL IN
outside_diameter1.5745 INCHES NOMINAL IN
size_designationLARGE
special_featuresPROTECTION TO ALLOW HEALING AFTER INJURY OR TO DECREASE PAIN, RELIEVE INFLAMMATION AND PREVENT FURTHER DEFORMITY OF PAINFUL WRISTS/THUMB TENDONITIS; TWO METAL STAYS; WASHABLE
style_designatorFLAT, IRREGULAR
NSN3110-00-100-0631
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A615-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0460 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.5745 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.0460 INCHES NOMINAL IN
OUTSIDE DIAMETER1.5745 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OVERALL WIDTH0.3750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
334C281H01Interchangeable
interchangeable cross-reference
interchangeable
121490Interchangeable
interchangeable cross-reference
interchangeable
A6157Interchangeable
interchangeable cross-reference
interchangeable
SB1361CInterchangeable
interchangeable cross-reference
interchangeable
ROLYAN D-RING SPICA SPLINTInterchangeable
interchangeable cross-reference
interchangeable
94-4-15-28 AHInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A615-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A615-7?
A615-7 is a CONE,TAPERED ROLLER BEARING.
What parts can replace A615-7?
There are 9 known substitutes for A615-7: 334C281H01, 121490, A6157 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A615-7?
A615-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0631. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A615-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026