PartsTable
Technical Data Sheet
Download PDF

A6062 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

A6062: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.4391 INCHES NOMINAL IN, design_type: STUB SINGLE ANTENNA ELEMENT, bore_diameter: 0.6250 INCHES NOMINAL IN, terminal_type: WIRE LEAD SINGLE ANTENNA ELEMENT, mounting_method: PLATE AND THREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3683, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A6062
NSN: 3110-00-100-3683
NIINs: 001003683, 002960643
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.4391 INCHES NOMINAL IN
design_typeSTUB SINGLE ANTENNA ELEMENT
bore_diameter0.6250 INCHES NOMINAL IN
terminal_typeWIRE LEAD SINGLE ANTENNA ELEMENT
mounting_methodPLATE AND THREADED HOLE(S)
frequency_rating0.950 GIGAHERTZ MINIMUM AND 1.150 GIGAHERTZ MAXIMUM SINGLE ANTENNA ELEMENT
style_designatorNORMAL ANGLE
radiation_patternOMNIDIRECTIONAL SINGLE ANTENNA ELEMENT
cone_corner_radius0.0460 INCHES NOMINAL IN
beam_scanning_methodFIXED SINGLE ANTENNA ELEMENT
fsc_application_dataANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
NSN3110-00-100-3683
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A6062 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0460 INCHES NOMINAL IN
•
CONE WIDTH: 0.4391 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 0.6250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0460 INCHES NOMINAL IN
CONE WIDTH0.4391 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER0.6250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
FF-B-187/1Reference document
Same NSN cross-reference
Reference document — Identification reference
HPPBR18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A6062?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A6062?
A6062 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace A6062?
There are 2 known substitutes for A6062: FF-B-187/1, HPPBR18. Substitute compatibility should be verified for your specific system.
What is the NSN for A6062?
A6062 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3683. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A6062

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.