PartsTable
Technical Data Sheet
Download PDF

A566-228 — BEARING,WASHER,THRUST

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

A566-228: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 0.5150 INCHES NOMINAL IN, material: LUBRICANT LUBRICATION, corner_shape: SQUARE ALL CORNERS, surface_finish: 63.0 MICROINCHES LARGEST OUTSIDE DIAMETER, outside_diameter: 1.1150 INCHES MINIMUM AND 1.1350 INCHES MAXIMUM IN, style_designator: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-897-4147, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A566-228
NSN: 3120-00-897-4147
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
diameter0.5150 INCHES NOMINAL IN
materialLUBRICANT LUBRICATION
corner_shapeSQUARE ALL CORNERS
surface_finish63.0 MICROINCHES LARGEST OUTSIDE DIAMETER
outside_diameter1.1150 INCHES MINIMUM AND 1.1350 INCHES MAXIMUM IN
style_designatorROUND
overall_thickness0.1230 INCHES MINIMUM AND 0.1270 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
bearing_surface_hole_diameter0.2100 INCHES NOMINAL FIRST IN
bearing_surface_hole_quantity6 FIRST
NSN3120-00-897-4147
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: A566-228 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES RIGHT SIDE
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BEARING SURFACE HOLE DIAMETER: 0.2100 INCHES NOMINAL FIRST IN
•
OVERALL THICKNESS: 0.1230 INCHES MINIMUM AND 0.1270 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ROUND
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES RIGHT SIDE
SURFACE FINISH63.0 MICROINCHES LARGEST OUTSIDE DIAMETER
SURFACE FINISH63.0 MICROINCHES LEFT SIDE
SURFACE FINISH63.0 MICROINCHES INNER MEMBER
CORNER SHAPESQUARE ALL CORNERS
BEARING SURFACE HOLE DIAMETER0.2100 INCHES NOMINAL FIRST IN
OVERALL THICKNESS0.1230 INCHES MINIMUM AND 0.1270 INCHES MAXIMUM IN
STYLE DESIGNATORROUND
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.5150 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288 3120-00-001-1835 3120-00-001-1838 3120-00-001-1928 3120-00-001-1934 3120-00-001-3933 3120-00-001-3937 3120-00-001-3938
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A566-228?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A566-228?
A566-228 is a BEARING,WASHER,THRUST.
What is the NSN for A566-228?
A566-228 is cataloged in the U.S. Government catalog under NSN 3120-00-897-4147. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A566-228