PartsTable
Technical Data Sheet
Download PDF

A547-801 — BEARING,WASHER,THRUST

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

A547-801: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 4.0050 INCHES MINIMUM AND 4.0150 INCHES MAXIMUM IN, material: LUBRICANT LUBRICATION, corner_shape: SQUARE ALL CORNERS, surface_finish: 125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY, outside_diameter: 4.1710 INCHES NOMINAL IN, style_designator: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-892-1906, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A547-801
NSN: 3120-00-892-1906
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
diameter4.0050 INCHES MINIMUM AND 4.0150 INCHES MAXIMUM IN
materialLUBRICANT LUBRICATION
corner_shapeSQUARE ALL CORNERS
surface_finish125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
outside_diameter4.1710 INCHES NOMINAL IN
style_designatorROUND
overall_thickness0.0600 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN3120-00-892-1906
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: A547-801 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES LARGEST OUTSIDE DIAMETER
•
CORNER SHAPE: SQUARE ALL CORNERS
•
OVERALL THICKNESS: 0.0600 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ROUND
•
DIAMETER: 4.0050 INCHES MINIMUM AND 4.0150 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES LARGEST OUTSIDE DIAMETER
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES RIGHT SIDE
SURFACE FINISH63.0 MICROINCHES LEFT SIDE
CORNER SHAPESQUARE ALL CORNERS
OVERALL THICKNESS0.0600 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM IN
STYLE DESIGNATORROUND
DIAMETER4.0050 INCHES MINIMUM AND 4.0150 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OUTSIDE DIAMETER4.1710 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy A547-801?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A547-801?
A547-801 is a BEARING,WASHER,THRUST.
What is the NSN for A547-801?
A547-801 is cataloged in the U.S. Government catalog under NSN 3120-00-892-1906. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A547-801