A539FFT5CR0YC021: BEARING,BALL,ANNULAR.
The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING INNER RING, bore_shape: STRAIGHT, bore_diameter: 0.7497 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, overall_width: 0.2802 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.
Government catalog under NSN 3110-00-084-3467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL CORROSION RESISTING INNER RING |
| bore_shape | STRAIGHT |
| bore_diameter | 0.7497 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN |
| overall_width | 0.2802 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN |
| seal_quantity | 2 |
| load_direction | RADIAL |
| surface_finish | GROUND |
| style_designator | NON-LOADING GROOVE, NON-SEPARABLE |
| bearing_seal_type | CONTACT |
| internal_clearance | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN |
| lubrication_material | GREASE |
| overall_outside_diameter | 1.1871 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM IN |
| NSN | 3110-00-084-3467 |
| BEARING SEAL TYPE | CONTACT |
| LUBRICATION MATERIAL | GREASE |
| INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN |
| SURFACE FINISH | GROUND |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| OVERALL WIDTH | 0.2802 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN |
| OVERALL OUTSIDE DIAMETER | 1.1871 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM IN |
| BORE SHAPE | STRAIGHT |
| LOAD DIRECTION | RADIAL |
| SPECIAL FEATURES | 0.0002 IN. INNER AND OUTER RING RADIAL RUNOUT,BEARING PREPACKED W/80 CM PORM 10 PCTOF SPECIFIED GREASE,BORE CALIBRATION PLAS 0.0000 IN. MINUS 0.00015 IN.,OF VSLIBRATION PLUS 0.0000 IN. MINUS 0.0002 IN. SELECTED ITEM DRAWING CM |