PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A5334
A5334 ✓ Verified by PartsTable
Nerf · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

Add to your arsenal with this 12-pack of Suction Darts! These foam darts are specially designed for high-flying, high-performance blasting. Their suction power makes them stick to most flat surfaces to mark your target, and they work with any N-Strike Elite blaster (sold separately). Lock and load with your 12-pack of Suction Darts!Pack includes 12 Suction Darts.Refill pack includes 12 Suction Darts Darts stick to targets with suction powerDarts work with all N-Strike Elite blasters (each sold separately)Ages 8 and upNerf and all related characters are trademarks of Hasbro.Warning:WARNING: Do not aim at eyes or face.

Use of eyewear recommended for players and people within range. Use only official Nerf darts. Other darts may not meet safety standards.

Do not modify darts or blaster. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-071-3209, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
A5334
NSN: 4730-00-071-3209
FSC: 4730
CAGE: 41947 — MUELLER BRASS CO. (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
seat_angle45.0 DEGREES ALL ENDS
reducer_typeCONCENTRIC
thread_class2A ALL ENDS A
connection_styleFLARED (TUBE) ALL ENDS
operating_pressure260.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.375 INCHES SECOND END IN
nominal_overall_length1.875 INCHES IN
media_for_which_designedREFRIGERATION COMPOUND SINGLE RESPONSE
thread_series_designatorUNF ALL ENDS
nominal_outside_diameter_tube_accommodated0.625 INCHES FIRST END IN
NSN4730-00-071-3209
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: A5334 · Nerf ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL OVERALL LENGTH: 1.875 INCHES IN
•
MEDIA FOR WHICH DESIGNED: REFRIGERATION COMPOUND SINGLE RESPONSE
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.625 INCHES FIRST END IN
•
NOMINAL THREAD SIZE: 0.375 INCHES SECOND END IN
•
SEAT ANGLE: 45.0 DEGREES ALL ENDS
•
THREAD SERIES DESIGNATOR: UNF ALL ENDS
•
OPERATING PRESSURE: 260.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL OVERALL LENGTH1.875 INCHES IN
MEDIA FOR WHICH DESIGNEDREFRIGERATION COMPOUND SINGLE RESPONSE
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.625 INCHES FIRST END IN
NOMINAL THREAD SIZE0.375 INCHES SECOND END IN
SEAT ANGLE45.0 DEGREES ALL ENDS
THREAD SERIES DESIGNATORUNF ALL ENDS
OPERATING PRESSURE260.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.375 INCHES SECOND END IN
THREAD CLASS2A ALL ENDS A
CONNECTION STYLEFLARED (TUBE) ALL ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
5299-1Interchangeable
interchangeable cross-reference
interchangeable
A6745-1-24Interchangeable
interchangeable cross-reference
interchangeable
A-6745-IR-Y-24Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A5334?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A5334?
A5334 is a REDUCER,TUBE manufactured by Nerf.
What parts can replace A5334?
There are 3 known substitutes for A5334: 5299-1, A6745-1-24, A-6745-IR-Y-24. Substitute compatibility should be verified for your specific system.
What is the NSN for A5334?
A5334 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-071-3209. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A5334

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026