PartsTable
Technical Data Sheet
Download PDF

A51M21500-11 — PIN,HOLLOW

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

A51M21500-11: PIN,HOLLOW.

The PIN,HOLLOW is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, first_end_style: CHAMFERED, inside_diameter: 1.370 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN, pin_overall_length: 3.000 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN, pin_overall_diameter: 1.8735 INCHES MINIMUM AND 1.8740 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-818-1691, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A51M21500-11
NSN: 5315-00-818-1691
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialTITANIUM ALLOY OVERALL
first_end_styleCHAMFERED
inside_diameter1.370 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
pin_overall_length3.000 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
pin_overall_diameter1.8735 INCHES MINIMUM AND 1.8740 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.047 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-818-1691
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A51M21500-11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.047 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 1.8735 INCHES MINIMUM AND 1.8740 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 3.000 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
INSIDE DIAMETER: 1.370 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
•
MATERIAL: TITANIUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.047 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER1.8735 INCHES MINIMUM AND 1.8740 INCHES MAXIMUM IN
PIN OVERALL LENGTH3.000 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
INSIDE DIAMETER1.370 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
MATERIALTITANIUM ALLOY OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy A51M21500-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A51M21500-11?
A51M21500-11 is a PIN,HOLLOW.
What is the NSN for A51M21500-11?
A51M21500-11 is cataloged in the U.S. Government catalog under NSN 5315-00-818-1691. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A51M21500-11