PartsTable
Technical Data Sheet
Download PDF

A51L10100-21 — CLAMP,BLOCK,SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A51L10100-21: CLAMP,BLOCK,SECTION.

The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: PLASTIC, block_height: 0.252 INCHES NOMINAL0.252 INCHES NOMINAL IN, overall_width: 0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN, overall_length: 2.649 INCHES NOMINAL2.649 INCHES NOMINAL IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-044-0894, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A51L10100-21
NSN: 5340-01-044-0894
FSC: 5340 — Hardware, Commercial
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC
block_height0.252 INCHES NOMINAL0.252 INCHES NOMINAL IN
overall_width0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN
overall_length2.649 INCHES NOMINAL2.649 INCHES NOMINAL IN
style_designatorRECTANGULAR
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter0.252 INCHES NOMINAL ALL HOLES IN
clamping_hole_quantity4
mounting_hole_diameter0.190 INCHES MINIMUM AND 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM IN
mounting_hole_quantity22
cable_diameter_for_which_designed0.252 INCHES NOMINAL ALL HOLES IN
material_document_and_classificationGM 4104 BFA,CAGEC 26512 MFR REF SINGLE MATERIAL RESPONSE
NSN5340-01-044-0894
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A51L10100-21 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 22
•
CLAMPING HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES: 1.824 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.550 INCHES NOMINAL IN
•
BLOCK HEIGHT: 0.252 INCHES NOMINAL0.252 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: GM 4104 BFA,CAGEC 26512 MFR REF SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.190 INCHES MINIMUM AND 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY22
CLAMPING HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES1.824 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER0.550 INCHES NOMINAL IN
BLOCK HEIGHT0.252 INCHES NOMINAL0.252 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONGM 4104 BFA,CAGEC 26512 MFR REF SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.190 INCHES MINIMUM AND 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM IN
OVERALL LENGTH2.649 INCHES NOMINAL2.649 INCHES NOMINAL IN
OVERALL WIDTH0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy A51L10100-21?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A51L10100-21?
A51L10100-21 is a CLAMP,BLOCK,SECTION.
What is the NSN for A51L10100-21?
A51L10100-21 is cataloged in the U.S. Government catalog under NSN 5340-01-044-0894. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A51L10100-21

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.