PartsTable
Technical Data Sheet
Download PDF

A51G92001-31 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A51G92001-31: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 75.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 8.100 INCHES NOMINAL IN, first_leg_length: 0.560 INCHES NOMINAL IN, second_leg_style: ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-285-4043, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A51G92001-31
NSN: 5340-01-285-4043
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
first_leg_angle75.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width8.100 INCHES NOMINAL IN
first_leg_length0.560 INCHES NOMINAL IN
second_leg_styleANGLE
second_leg_width8.100 INCHES NOMINAL IN
special_featuresSECOND LEG HAS A 0.380 IN. WIDE LIP BENT AT 77.40 DEGREES ALONG ANGLE EDGE AND A 0.120 IN. W BY 3.310 IN. LG NOTCH IN
style_designatorANGLE
second_leg_length4.940 INCHES NOMINAL IN
surface_treatmentPRIMER EPOXY
first_leg_thickness0.020 INCHES NOMINAL IN
NSN5340-01-285-4043
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A51G92001-31 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 75.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
•
FIRST LEG CORNER RADIUS: 0.220 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 8.100 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 4.940 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: NO HOLE
•
STYLE DESIGNATOR: ANGLE
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE75.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS0.220 INCHES NOMINAL IN
SECOND LEG WIDTH8.100 INCHES NOMINAL IN
SECOND LEG LENGTH4.940 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
STYLE DESIGNATORANGLE
FIRST LEG STYLECORNER RADIUS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4,T62 FED SPEC SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A51G92001-31?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A51G92001-31?
A51G92001-31 is a BRACKET,ANGLE.
What is the NSN for A51G92001-31?
A51G92001-31 is cataloged in the U.S. Government catalog under NSN 5340-01-285-4043. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A51G92001-31

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.