PartsTable
Technical Data Sheet
Download PDF

A51F11514-11 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A51F11514-11: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, fork_depth: 0.250 INCHES NOMINAL IN, shank_length: 2.500 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A, hole_diameter: 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, overall_width: 0.510 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-413-3417, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A51F11514-11
NSN: 5340-00-413-3417
FSC: 5340 — Hardware, Commercial
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
fork_depth0.250 INCHES NOMINAL IN
shank_length2.500 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
hole_diameter0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
overall_width0.510 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
thread_length1.250 INCHES NOMINAL ROD CONNECTION IN
overall_height0.500 INCHES NOMINAL IN
shank_diameter0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
fork_span_width0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
special_featuresPRONG HAS TWO PIVOT HOLES LOCATED 0.625 IN.,APART,HOLES IN ONE PRONG ONLY IN
style_designatorCLEVIS
NSN5340-00-413-3417
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A51F11514-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.125 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END: 1.000 INCHES NOMINAL IN
•
THREAD LENGTH: 1.250 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 2.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
OVERALL HEIGHT0.500 INCHES NOMINAL IN
FORK SPAN WIDTH0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
FORK ARM THICKNESS0.125 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END1.000 INCHES NOMINAL IN
THREAD LENGTH1.250 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH2.500 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy A51F11514-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A51F11514-11?
A51F11514-11 is a CLEVIS,ROD END.
What is the NSN for A51F11514-11?
A51F11514-11 is cataloged in the U.S. Government catalog under NSN 5340-00-413-3417. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A51F11514-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.