PartsTable
Technical Data Sheet
Download PDF

A51B92506-421 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A51B92506-421: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_style: CORNER RADIUS, first_leg_length: 0.920 INCHES NOMINAL IN, style_designator: ANGLE, second_leg_length: 1.450 INCHES NOMINAL IN, surface_treatment: PRIMER EPOXY. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-283-5479, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A51B92506-421
NSN: 5340-01-283-5479
FSC: 5340 — Hardware, Commercial
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
first_leg_styleCORNER RADIUS
first_leg_length0.920 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.450 INCHES NOMINAL IN
surface_treatmentPRIMER EPOXY
mounting_hole_typePLAIN
first_leg_thickness0.050 INCHES NOMINAL IN
second_leg_thickness0.050 INCHES NOMINAL IN
first_leg_hole_diameter0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
second_leg_hole_diameter0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleTWO HOLES
NSN5340-01-283-5479
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A51B92506-421 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG HOLE DIAMETER: 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
•
SECOND LEG LENGTH: 1.450 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: CORNER RADIUS
TECHNICAL CHARACTERISTICS
FIRST LEG HOLE DIAMETER0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
SECOND LEG LENGTH1.450 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
STYLE DESIGNATORANGLE
FIRST LEG STYLECORNER RADIUS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4 T62 FED SPEC SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.050 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A51B92506-421?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A51B92506-421?
A51B92506-421 is a BRACKET,ANGLE.
What is the NSN for A51B92506-421?
A51B92506-421 is cataloged in the U.S. Government catalog under NSN 5340-01-283-5479. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A51B92506-421

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.