A51B46550-17: WASHER,BEVEL.
The WASHER,BEVEL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, hole_diameter: 0.376 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN, overall_width: 0.750 INCHES NOMINAL IN, major_thickness: 0.200 INCHES NOMINAL IN, special_features: 2 PARALLEL BEVEL EDGES CHAMFERED 45 DEG BY 0.100 IN. IN, style_designator: BEVEL.
This part is cataloged in the U.S. Government catalog under NSN 5310-00-003-3848, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 2024 OVERALL |
| hole_diameter | 0.376 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN |
| overall_width | 0.750 INCHES NOMINAL IN |
| major_thickness | 0.200 INCHES NOMINAL IN |
| special_features | 2 PARALLEL BEVEL EDGES CHAMFERED 45 DEG BY 0.100 IN. IN |
| style_designator | BEVEL |
| material_document_and_classification | QQ-A-250,ALLOY 2024,T851 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| part_name_assigned_by_controlling_agency | NAVY SPECIAL PROJECT |
| flat_side_distance_between_thick_and_thin_edges | 0.750 INCHES NOMINAL IN |
| NSN | 5310-00-003-3848 |
| STYLE DESIGNATOR | BEVEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250,ALLOY 2024,T851 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| OVERALL WIDTH | 0.750 INCHES NOMINAL IN |
| MAJOR THICKNESS | 0.200 INCHES NOMINAL IN |
| SPECIAL FEATURES | 2 PARALLEL BEVEL EDGES CHAMFERED 45 DEG BY 0.100 IN. IN |
| FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES | 0.750 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| TEST DATA DOCUMENT | 81349-MIL-I-25135 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| HOLE DIAMETER | 0.376 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.