PartsTable
Technical Data Sheet
Download PDF

A51B28504-14 — LEAF,BUTT HINGE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A51B28504-14: LEAF,BUTT HINGE.

The LEAF,BUTT HINGE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, hinge_pin: NOT INCLUDED, knuckle_type: FRICTION, knuckle_length: 0.616 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN, overall_length: 24.480 INCHES NOMINAL IN, knuckle_quantity: 19. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-236-7277, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A51B28504-14
NSN: 5340-01-236-7277
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
hinge_pinNOT INCLUDED
knuckle_typeFRICTION
knuckle_length0.616 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
overall_length24.480 INCHES NOMINAL IN
knuckle_quantity19
performance_typeNOT RATED
surface_treatmentANODIZE OVERALL
reversible_featureNOT INCLUDED
knuckle_inside_diameter0.183 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
pin_center_to_body_edge_distance2.800 INCHES NOMINAL IN
leaf_outer_edge_to_hole_center_vertical_distance0.375 INCHES NOMINAL IN
NSN5340-01-236-7277
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A51B28504-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
REVERSIBLE FEATURE: NOT INCLUDED
•
KNUCKLE INSIDE DIAMETER: 0.183 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
PIN CENTER TO BODY EDGE DISTANCE: 2.800 INCHES NOMINAL IN
•
HINGE PIN: NOT INCLUDED
•
KNUCKLE QUANTITY: 19
•
KNUCKLE LENGTH: 0.616 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
TECHNICAL CHARACTERISTICS
REVERSIBLE FEATURENOT INCLUDED
KNUCKLE INSIDE DIAMETER0.183 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
OVERALL LENGTH24.480 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE2.800 INCHES NOMINAL IN
HINGE PINNOT INCLUDED
KNUCKLE QUANTITY19
KNUCKLE LENGTH0.616 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
KNUCKLE TYPEFRICTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A51B28504-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A51B28504-14?
A51B28504-14 is a LEAF,BUTT HINGE.
What is the NSN for A51B28504-14?
A51B28504-14 is cataloged in the U.S. Government catalog under NSN 5340-01-236-7277. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A51B28504-14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.