PartsTable
Technical Data Sheet
Download PDF

A5140 — PARTS KIT,DUMP UNIT VALVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A5140: PARTS KIT,DUMP UNIT VALVE.

The PARTS KIT,DUMP UNIT VALVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: TUBE COUPLING, nut_height: 0.690 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-140-4932, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A5140
NSN: 5330-00-140-4932
NIINs: 001404932, 007409205, 007693958
FSC: 5330 — Packing and Gasket Materials
CAGE: 91940 — ORTMAN FLUID POWER QUINCY COMPRESSOR DIV SUB OF COLTEC INDUSTRIES INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleTUBE COUPLING
nut_height0.690 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.875 INCHES NOMINAL IN
nominal_thread_size0.625 INCHES IN
smallest_inside_diameter0.250 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_quantity_per_inch18
nominal_tube_outside_diameter0.250 INCHES IN
general_characteristics_item_descriptionFSCM 31007,P/N 104024R1 OR FSCM 27996,P/N 19A905,SPRING,1 EA
NSN5330-00-140-4932
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A5140 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEPARATOR QUANTITY: 2
•
INTERMEDIATE RING QUANTITY: 1
•
OUTSIDE DIAMETER: 4.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: V BOTTOM RING
•
INSIDE DIAMETER: 3.750 INCHES NOMINAL IN
•
HEIGHT: 0.907 INCHES NOMINAL IN
•
MATERIAL: PLASTIC PHENOLIC TOP RING
TECHNICAL CHARACTERISTICS
SEPARATOR QUANTITY2
INTERMEDIATE RING QUANTITY1
OUTSIDE DIAMETER4.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEV BOTTOM RING
INSIDE DIAMETER3.750 INCHES NOMINAL IN
HEIGHT0.907 INCHES NOMINAL IN
MATERIALPLASTIC PHENOLIC TOP RING
MATERIALRUBBER AND COTTON INTERMEDIATE RING
MATERIALRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR AND COTTON BOTTOM RING
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy A5140?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A5140?
A5140 is a PARTS KIT,DUMP UNIT VALVE.
What is the NSN for A5140?
A5140 is cataloged in the U.S. Government catalog under NSN 5330-00-140-4932. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A5140