PartsTable
Technical Data Sheet
A5034 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.312 INCHES NOMINAL IN, body_diameter: 0.156 INCHES NOMINAL IN, reliability_indicator: NOT ESTABLISHED, terminal_type_and_quantity: 2 UNINSULATED WIRE LEAD, tolerance_range_per_section: -0.047 TO 0.047 PICOFARADS SINGLE SECTION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-323-4379, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL A5034
NSN: 5340-00-323-4379
FSC: 5340
CAGE: 78710 — TRIUMPH CONTROLS, LLC DBA TRIUMPH CONTROLS, LLC (USA)
SPECIFICATIONS
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length0.312 INCHES NOMINAL IN
body_diameter0.156 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
tolerance_range_per_section-0.047 TO 0.047 PICOFARADS SINGLE SECTION
schematic_diagram_designatorNO COMMON OR GROUNDED ELECTRODE(S)
capacitance_value_per_section0.470 PICOFARADS SINGLE SECTION
part_name_assigned_by_controlling_agencyCLAMP,CABLE LOCKING,BOLT,TYPE,CONTROL
nonderated_continuous_voltage_rating_and_type_per_section500.0 DC SINGLE SECTION
NSN5340-00-323-4379
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A5034 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP,CABLE LOCKING,BOLT,TYPE,CONTROL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
94-1-6-63 DEUpgraded Successor
successor cross-reference
successor
210498Upgraded Successor
successor cross-reference
successor
169249Upgraded Successor
successor cross-reference
successor
A5034Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A5034?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A5034?
A5034 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace A5034?
There are 4 known substitutes for A5034: 94-1-6-63 DE, 210498, 169249 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A5034?
A5034 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-323-4379. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A5034