PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A5007
A5007 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ADAPTER,STRAIGHT,PIPE TO TUBE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CASE, case_style: SQUARE, flow_angle: 90.0 DEGREES, leg_length: 0.880 INCHES NOMINAL FIRST END IN, seal_width: 0.314 INCHES NOMINAL IN, seat_angle: 45.0 DEGREES FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-236-3759, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A5007
NSN: 5330-00-236-3759
FSC: 5330
CAGE: 44408 — OBERDORFER FOUNDRIES INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY CASE
case_styleSQUARE
flow_angle90.0 DEGREES
leg_length0.880 INCHES NOMINAL FIRST END IN
seal_width0.314 INCHES NOMINAL IN
seat_angle45.0 DEGREES FIRST END
thread_class2A FIRST END A
connection_typeTHREADED EXTERNAL TUBE FIRST END
connection_stylePLAIN (PIPE) SECOND END
special_featuresWEAPON SYSTEM ESSENTIAL
operating_pressure400.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.438 INCHES FIRST END IN
NSN5330-00-236-3759
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A5007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: COPPER ALLOY CASE
•
SEAL WIDTH: 0.314 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 0.875 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 0.475 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
MATERIALCOPPER ALLOY CASE
SEAL WIDTH0.314 INCHES NOMINAL IN
CASE STYLESQUARE
HOUSING BORE DIAMETER0.875 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER0.475 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1841050Interchangeable
interchangeable cross-reference
interchangeable
CVB41S5901-86ALT2PC48Interchangeable
interchangeable cross-reference
interchangeable
410868AITEM89Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A5007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A5007?
A5007 is a ADAPTER,STRAIGHT,PIPE TO TUBE.
What parts can replace A5007?
There are 3 known substitutes for A5007: 1841050, CVB41S5901-86ALT2PC48, 410868AITEM89. Substitute compatibility should be verified for your specific system.
What is the NSN for A5007?
A5007 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-236-3759. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A5007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026