PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A46505-5
A46505-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include special_features: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS, peripheral_diameter: 0.818 INCHES NOMINAL IN, center_hole_diameter: 0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-288-4786, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A46505-5
NSN: 5330-01-288-4786
FSC: 5330
CAGE: 15187 — EMERSON AUTOMATION SOLUTIONS FINAL CONTROL US LP DIV NAVY PRODUCT TEAM (USA)
SPECIFICATIONS
special_featuresMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS
peripheral_diameter0.818 INCHES NOMINAL IN
center_hole_diameter0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5330-01-288-4786
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A46505-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.818 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.818 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS
CENTER HOLE DIAMETER0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
D-WK-492-A43 ITEM 14-22Interchangeable
interchangeable cross-reference
interchangeable
FF-101-0 ITEM 14Interchangeable
interchangeable cross-reference
interchangeable
N0674 2-114Interchangeable
interchangeable cross-reference
interchangeable
2-114C557-70Interchangeable
interchangeable cross-reference
interchangeable
200-809P3Interchangeable
interchangeable cross-reference
interchangeable
5012-73Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A46505-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A46505-5?
A46505-5 is a PACKING,PREFORMED.
What parts can replace A46505-5?
There are 18 known substitutes for A46505-5: D-WK-492-A43 ITEM 14-22, FF-101-0 ITEM 14, N0674 2-114 and 15 more. Substitute compatibility should be verified for your specific system.
Is A46505-5 still available?
A46505-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A46505-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026