PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A42-2
A42-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The JACK,HYDRAULIC,TRIPOD is a the manufacturer industrial component. Key specifications include material: FIBER AND RUBBER BODY, body_height: 0.325 INCHES NOMINAL IN, body_diameter: 0.660 INCHES NOMINAL IN, load_capacity: 3.000 TONS, terminal_type: TAB, SOLDER LUG, overall_height: 0.629 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-103-0623, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A42-2
NSN: 5315-00-103-0623
FSC: 5315
CAGE: 00141 — ROLLER BEARING CO OF AMERICA, INC DIV PIC DESIGN (USA)
SPECIFICATIONS
materialFIBER AND RUBBER BODY
body_height0.325 INCHES NOMINAL IN
belt_quantity2
body_diameter0.660 INCHES NOMINAL IN
load_capacity3.000 TONS
terminal_typeTAB, SOLDER LUG
overall_height0.629 INCHES NOMINAL IN
overall_length1.188 INCHES NOMINAL IN
first_end_styleCHAMFERED
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
mounting_methodBRACKET(S) AND UNTHREADED HOLE(S)
outside_diameter3.344 INCHES NOMINAL IN
NSN5315-00-103-0623
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A42-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 2.250 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
PIN OVERALL DIAMETER: 0.1250 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH2.250 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
PIN OVERALL DIAMETER0.1250 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 303 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
7-14-019Interchangeable
interchangeable cross-reference
interchangeable
A422Interchangeable
interchangeable cross-reference
interchangeable
051047Interchangeable
interchangeable cross-reference
interchangeable
A42 MATCHED SET 2Interchangeable
interchangeable cross-reference
interchangeable
A42SSET2Interchangeable
interchangeable cross-reference
interchangeable
146-012-0001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A42-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A42-2?
A42-2 is a JACK,HYDRAULIC,TRIPOD.
What parts can replace A42-2?
There are 12 known substitutes for A42-2: 7-14-019, A422, 051047 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A42-2?
A42-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-103-0623. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A42-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026