PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A41482
A41482 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 2.210 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 2.085 INCHES NOMINAL IN, fsc_application_data: CONNECTOR ELECTRICAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-526-9246, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A41482
NSN: 5330-00-526-9246
FSC: 5330
CAGE: 49367 — AMPHENOL CORPORATION DBA AMPHENOL AEROSPACE INDUSTRIAL DIV AMPHENOL AEROSPACE/PYLE NATIONAL (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter2.210 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter2.085 INCHES NOMINAL IN
fsc_application_dataCONNECTOR ELECTRICAL
cross-sectional_thickness0.188 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-526-9246
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A41482 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.210 INCHES NOMINAL IN
•
HARDNESS RATING: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
FSC APPLICATION DATA: CONNECTOR ELECTRICAL
•
APERTURE DIAMETER: 2.085 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.210 INCHES NOMINAL IN
HARDNESS RATING35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL THICKNESS0.188 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
STYLE DESIGNATORCIRCULAR
MATERIALRUBBER SYNTHETIC OVERALL
FSC APPLICATION DATACONNECTOR ELECTRICAL
APERTURE DIAMETER2.085 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
0042864Interchangeable
interchangeable cross-reference
interchangeable
042864Interchangeable
interchangeable cross-reference
interchangeable
477Interchangeable
interchangeable cross-reference
interchangeable
42864Interchangeable
interchangeable cross-reference
interchangeable
332C332P14Interchangeable
interchangeable cross-reference
interchangeable
PAC20-4AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A41482?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A41482?
A41482 is a GASKET.
What parts can replace A41482?
There are 9 known substitutes for A41482: 0042864, 042864, 477 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A41482?
A41482 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-526-9246. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A41482

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026