PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A409TAN16426
A409TAN16426 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,QUICK RELEASE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, grip_length: 0.900 INCHES NOMINAL IN, actuation_type: PULL AND PUSH, shank_diameter: 0.250 INCHES NOMINAL IN, shear_strength: 3525 SINGLE POUNDS PER SQUARE INCH, surface_treatment: CADMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-290-4696, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A409TAN16426
NSN: 5315-00-290-4696
FSC: 5315
CAGE: D1081 — AIRBUS DEUTSCHLAND GMBH -WERK BREMEN- (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
grip_length0.900 INCHES NOMINAL IN
actuation_typePULL AND PUSH
shank_diameter0.250 INCHES NOMINAL IN
shear_strength3525 SINGLE POUNDS PER SQUARE INCH
surface_treatmentCADMIUM OVERALL
pin_attachment_typeRING
shoulder_to_head_end_distance0.720 INCHES NOMINAL IN
detent_to_tapered_end_distance0.410 INCHES NOMINAL IN
NSN5315-00-290-4696
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A409TAN16426 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACTUATION TYPE: PULL AND PUSH
•
PIN ATTACHMENT TYPE: RING
•
GRIP LENGTH: 0.900 INCHES NOMINAL IN
•
DETENT TO TAPERED END DISTANCE: 0.410 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
SHOULDER TO HEAD END DISTANCE: 0.720 INCHES NOMINAL IN
•
SHANK DIAMETER: 0.250 INCHES NOMINAL IN
•
SHEAR STRENGTH: 3525 SINGLE POUNDS PER SQUARE INCH
TECHNICAL CHARACTERISTICS (FLIS)
ACTUATION TYPEPULL AND PUSH
PIN ATTACHMENT TYPERING
GRIP LENGTH0.900 INCHES NOMINAL IN
DETENT TO TAPERED END DISTANCE0.410 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SHOULDER TO HEAD END DISTANCE0.720 INCHES NOMINAL IN
SHANK DIAMETER0.250 INCHES NOMINAL IN
SHEAR STRENGTH3525 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
240-9004-009Interchangeable
interchangeable cross-reference
interchangeable
TC1830Interchangeable
interchangeable cross-reference
interchangeable
A409Interchangeable
interchangeable cross-reference
interchangeable
BLS4R09NInterchangeable
interchangeable cross-reference
interchangeable
2614E30Interchangeable
interchangeable cross-reference
interchangeable
21S4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A409TAN16426?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A409TAN16426?
A409TAN16426 is a PIN,QUICK RELEASE.
What parts can replace A409TAN16426?
There are 10 known substitutes for A409TAN16426: 240-9004-009, TC1830, A409 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A409TAN16426?
A409TAN16426 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-290-4696. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A409TAN16426

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026