PartsTable
Technical Data Sheet
PartsTable / O-RING / A395X83
A395X83 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: 2520-00-230-3613, part_name_assigned_by_controlling_agency: PACKING,PREFORMED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-707-1247, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A395X83
NSN: 5331-00-707-1247
FSC: 5331 — O-RING
CAGE: 0E9N0 — DAVID BROWN HYDRAULICS INC DBA HYDRECO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identification2520-00-230-3613
part_name_assigned_by_controlling_agencyPACKING,PREFORMED
NSN5331-00-707-1247
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A395X83 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
END ITEM IDENTIFICATION2520-00-230-3613
PART NAME ASSIGNED BY CONTROLLING AGENCYPACKING,PREFORMED
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
A395X83Interchangeable
interchangeable cross-reference
interchangeable
MILP5516CLASSAInterchangeable
interchangeable cross-reference
interchangeable
P15133Interchangeable
interchangeable cross-reference
interchangeable
SOCN10870588Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A395X83?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A395X83?
A395X83 is a O-RING.
What parts can replace A395X83?
There are 4 known substitutes for A395X83: A395X83, MILP5516CLASSA, P15133 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A395X83?
A395X83 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-707-1247. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A395X83

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026