PartsTable
Technical Data Sheet
Download PDF

A38175 — BUTTON,PLUG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A38175: BUTTON,PLUG.

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, head_height: 0.090 INCHES NOMINAL IN, overall_height: 0.300 INCHES NOMINAL IN, prong_quantity: 12, style_designator: STANDARD, head_outside_diameter: 1.310 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-470-0556, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A38175
NSN: 5340-00-470-0556
FSC: 5340 — Hardware, Commercial
CAGE: 58250 — BALLANTYNE OF OMAHA INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
head_height0.090 INCHES NOMINAL IN
overall_height0.300 INCHES NOMINAL IN
prong_quantity12
style_designatorSTANDARD
head_outside_diameter1.310 INCHES NOMINAL IN
prong_outside_diameter1.060 INCHES NOMINAL IN
hole_accommodation_diameter1.060 INCHES NOMINAL IN
material_accommodated_thickness0.077 INCHES NOMINAL IN
NSN5340-00-470-0556
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A38175 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.090 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 1.060 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.077 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STANDARD
•
PRONG OUTSIDE DIAMETER: 1.060 INCHES NOMINAL IN
•
HEAD OUTSIDE DIAMETER: 1.310 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.300 INCHES NOMINAL IN
HEAD HEIGHT0.090 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER1.060 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.077 INCHES NOMINAL IN
STYLE DESIGNATORSTANDARD
PRONG OUTSIDE DIAMETER1.060 INCHES NOMINAL IN
HEAD OUTSIDE DIAMETER1.310 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING
PRONG QUANTITY12
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
SS51149Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy A38175?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A38175?
A38175 is a BUTTON,PLUG.
What parts can replace A38175?
There is 1 known substitute for A38175: SS51149. Substitute compatibility should be verified for your specific system.
What is the NSN for A38175?
A38175 is cataloged in the U.S. Government catalog under NSN 5340-00-470-0556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A38175