PartsTable
Technical Data Sheet
Download PDF

A368-6 — RESISTOR NETWORK,FIXED,FILM

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

A368-6: RESISTOR NETWORK,FIXED,FILM.

The RESISTOR NETWORK,FIXED,FILM is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 260 OVERALL, thickness: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, body_width: 0.290 INCHES MAXIMUM IN, body_height: 0.125 INCHES NOMINAL IN, body_length: 0.765 INCHES MAXIMUM IN, hole_diameter: 0.163 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-482-1641, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ A368-6
NSN: 5310-00-482-1641
NIINs: 004821641, 010741748
FSC: 5310 — Nuts and Washers
CAGE: 72914 — GRIMES AEROSPACE COMPANY (USA)
SPECIFICATIONS
materialCOPPER ALLOY 260 OVERALL
thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
body_width0.290 INCHES MAXIMUM IN
body_height0.125 INCHES NOMINAL IN
body_length0.765 INCHES MAXIMUM IN
hole_diameter0.163 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
terminal_typePIN
terminal_length0.135 INCHES NOMINAL IN
inclosure_methodENCAPSULATED
overall_diameter0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
style_designatorDUAL INLINE
surface_treatmentCADMIUM OVERALL
NSN5310-00-482-1641
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A368-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER ALLOY 260 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALCOPPER ALLOY 260 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.163 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
FF-W-92BReference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A368-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A368-6?
A368-6 is a RESISTOR NETWORK,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).
What parts can replace A368-6?
There is 1 known substitute for A368-6: FF-W-92B. Substitute compatibility should be verified for your specific system.
What is the NSN for A368-6?
A368-6 is cataloged in the U.S. Government catalog under NSN 5310-00-482-1641. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A368-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.