PartsTable
Technical Data Sheet
Download PDF

A36563PC44 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A36563PC44: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, fork_depth: 2.750 INCHES NOMINAL IN, hole_diameter: 0.578 INCHES NOMINAL IN, overall_width: 2.030 INCHES NOMINAL IN, overall_height: 1.268 INCHES NOMINAL IN, fork_span_width: 1.354 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-046-1961, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A36563PC44
NSN: 5340-01-046-1961
FSC: 5340 — Hardware, Commercial
CAGE: 15187 — EMERSON AUTOMATION SOLUTIONS FINAL CONTROL US LP DIV NAVY PRODUCT TEAM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
fork_depth2.750 INCHES NOMINAL IN
hole_diameter0.578 INCHES NOMINAL IN
overall_width2.030 INCHES NOMINAL IN
overall_height1.268 INCHES NOMINAL IN
fork_span_width1.354 INCHES NOMINAL IN
style_designatorCLEVIS
fork_arm_thickness0.338 INCHES NOMINAL IN
distance_from_pivot_pinhole_center_to_rod_connection_end4.914 INCHES NOMINAL IN
NSN5340-01-046-1961
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A36563PC44 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 1.354 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.338 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL: STEEL OVERALL
•
FORK DEPTH: 2.750 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.578 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.268 INCHES NOMINAL IN
FORK SPAN WIDTH1.354 INCHES NOMINAL IN
FORK ARM THICKNESS0.338 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH2.030 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
FORK DEPTH2.750 INCHES NOMINAL IN
HOLE DIAMETER0.578 INCHES NOMINAL IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END4.914 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
A36565 PIECE 44Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A36563PC44?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A36563PC44?
A36563PC44 is a CLEVIS,ROD END.
What parts can replace A36563PC44?
There is 1 known substitute for A36563PC44: A36565 PIECE 44. Substitute compatibility should be verified for your specific system.
What is the NSN for A36563PC44?
A36563PC44 is cataloged in the U.S. Government catalog under NSN 5340-01-046-1961. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A36563PC44

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.