PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A36558
A36558 ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include general_characteristics_item_description: STEEL,CORROSION RESISTING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-164-4168, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A36558
NSN: 4820-00-164-4168
FSC: 4820
CAGE: 15187 — EMERSON AUTOMATION SOLUTIONS FINAL CONTROL US LP DIV NAVY PRODUCT TEAM (USA)
SPECIFICATIONS
general_characteristics_item_descriptionSTEEL,CORROSION RESISTING
NSN4820-00-164-4168
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: A36558 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RAISED FACE NOMINAL HEIGHT: 0.062 INCHES FIRST END IN
•
BONNET TYPE: EXPOSED SPRING
•
STYLE DESIGNATOR: ANGLE FLANGED ENDS
•
BOLT HOLE NOMINAL DIAMETER: 0.875 INCHES FIRST END IN
•
FEATURES PROVIDED: PRESSURE TIGHT OUTLET SIDE
•
FLANGE SHAPE: ROUND WITH HOLES SECOND END
•
RAISED FACE NOMINAL DIAMETER: 6.188 INCHES FIRST END IN
TECHNICAL CHARACTERISTICS (FLIS)
RAISED FACE NOMINAL HEIGHT0.062 INCHES FIRST END IN
BONNET TYPEEXPOSED SPRING
STYLE DESIGNATORANGLE FLANGED ENDS
BOLT HOLE NOMINAL DIAMETER0.875 INCHES FIRST END IN
FEATURES PROVIDEDPRESSURE TIGHT OUTLET SIDE
STYLE DESIGNATORANGLE FLANGED ENDS
FLANGE SHAPEROUND WITH HOLES SECOND END
RAISED FACE NOMINAL DIAMETER6.188 INCHES FIRST END IN
BOLT HOLE QUANTITY8 SECOND END
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY THE VALVE DISCHARGE FLOW RATE REQUIREMENT AND AS MODIFIED BY CROSBY VALVE AND GAGE CO DRAWING H45061 SHEET 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
29967PC22Interchangeable
interchangeable cross-reference
interchangeable
A36558Interchangeable
interchangeable cross-reference
interchangeable
30025PC22Interchangeable
interchangeable cross-reference
interchangeable
A36558PC2-PT101594Interchangeable
interchangeable cross-reference
interchangeable
101594Interchangeable
interchangeable cross-reference
interchangeable
A36558PC2-PT101Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A36558?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A36558?
A36558 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace A36558?
There are 6 known substitutes for A36558: 29967PC22, A36558, 30025PC22 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A36558?
A36558 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-164-4168. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A36558

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026