PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A361-10
A361-10 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.311 INCHES NOMINAL IN, outside_diameter: 0.591 INCHES NOMINAL IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: ZINC OVERALL, material_thickness: 0.078 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-500-5805, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A361-10
NSN: 5310-01-500-5805
FSC: 5310
CAGE: 03533 — CRANE CARRIER COMPANY, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.311 INCHES NOMINAL IN
outside_diameter0.591 INCHES NOMINAL IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentZINC OVERALL
material_thickness0.078 INCHES NOMINAL IN
end_item_identification2320-01-452-5579
NSN5310-01-500-5805
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A361-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.078 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.591 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.311 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.078 INCHES NOMINAL IN
OUTSIDE DIAMETER0.591 INCHES NOMINAL IN
HOLE DIAMETER0.311 INCHES NOMINAL IN
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
END ITEM IDENTIFICATION2320-01-452-5579
MATERIALSTEEL OVERALL
SURFACE TREATMENTZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
361000Interchangeable
interchangeable cross-reference
interchangeable
361000-1Interchangeable
interchangeable cross-reference
interchangeable
V2-100Interchangeable
interchangeable cross-reference
interchangeable
36-110Interchangeable
px12-450r
interchangeable
V2-308060-200Interchangeable
interchangeable cross-reference
interchangeable
701191-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A361-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A361-10?
A361-10 is a WASHER,LOCK.
What parts can replace A361-10?
There are 11 known substitutes for A361-10: 361000, 361000-1, V2-100 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A361-10?
A361-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-500-5805. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A361-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026