PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A33395
A33395 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.344 INCHES NOMINAL IN, fork_depth: 1.250 INCHES NOMINAL IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.312 INCHES NOMINAL IN, overall_width: 0.688 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-492-0546, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A33395
NSN: 5340-00-492-0546
FSC: 5340
CAGE: 41625 — INCOM INTL INC MORSE CONTROLS DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.344 INCHES NOMINAL IN
fork_depth1.250 INCHES NOMINAL IN
thread_class3B ROD CONNECTION
hole_diameter0.312 INCHES NOMINAL IN
overall_width0.688 INCHES NOMINAL IN
thread_length1.000 INCHES NOMINAL ROD CONNECTION IN
fork_span_width0.312 INCHES NOMINAL IN
overall_diameter0.438 INCHES NOMINAL IN
special_featuresFURNISHED W/PIN AND COTTER PIN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
NSN5340-00-492-0546
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A33395 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNF ROD CONNECTION
•
THREAD LENGTH: 1.000 INCHES NOMINAL ROD CONNECTION IN
•
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 2.250 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.438 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNF ROD CONNECTION
THREAD LENGTH1.000 INCHES NOMINAL ROD CONNECTION IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END2.250 INCHES NOMINAL IN
OVERALL DIAMETER0.438 INCHES NOMINAL IN
FORK SPAN WIDTH0.312 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIALSTEEL OVERALL
SPECIAL FEATURESFURNISHED W/PIN AND COTTER PIN
THREAD CLASS3B ROD CONNECTION
FORK DEPTH1.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
9325C11-1757-01Upgraded Successor
successor cross-reference
successor
33395Upgraded Successor
successor cross-reference
successor
P3726Interchangeable
interchangeable cross-reference
interchangeable
3395Interchangeable
interchangeable cross-reference
interchangeable
TF0113ZA5Interchangeable
interchangeable cross-reference
interchangeable
CHROME ADJUSTABLE FOLDING HAMPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A33395?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A33395?
A33395 is a CLEVIS,ROD END.
What parts can replace A33395?
There are 8 known substitutes for A33395: 9325C11-1757-01, 33395, P3726 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A33395?
A33395 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-492-0546. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A33395

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026