A3273875-001 — DUCT,HPA

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

A3273875-001: DUCT,HPA.

The DUCT,HPA is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, overall_width: 5.100 INCHES NOMINAL IN, overall_height: 0.730 INCHES NOMINAL IN, overall_length: 10.750 INCHES NOMINAL IN, special_markings: MARK IAW MIL-STD-130 "80063-A3273875-1 TO INCLUDE MFR CAGE CODE, surface_treatment: PASSIVATE AND PRIMER AND ENAMEL. This part is cataloged in the U.S.

Government catalog under NSN 5975-01-531-9564, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

A3273875-001

NSN: 5975-01-531-9564
FSC: 5975 — Electrical Hardware and Supplies
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY
overall_width	5.100 INCHES NOMINAL IN
overall_height	0.730 INCHES NOMINAL IN
overall_length	10.750 INCHES NOMINAL IN
special_features	MATL IS 0.125 THK AL ALY SH, ASTM B209, 5061-T6; FINISH IS MIL-F-14072, FINISH NO. P513.1 PLUS 2 COATS TT-E-529 IAW FED-STD-595, COLOR NO 26250 (SEMIGLOSS GRAY)
special_markings	MARK IAW MIL-STD-130 "80063-A3273875-1 TO INCLUDE MFR CAGE CODE
surface_treatment	PASSIVATE AND PRIMER AND ENAMEL
supplementary_features	HAS 2 HOLES 3.750 IN. THRU WITH 0.605 IN. HIGH COLLARSATTACHED; 10 MOUNTING HOLES, 0.250 IN. DIA., 4 NEAR EACH LONG SIDE AND ONE AT CENTER OF EACH SHORT SIDE IN
end_item_identification	0A-9234(V)/G; OT-208(V)/G, TRANSMITTER GROUP A
NSN	5975-01-531-9564

COMPONENT DIAGRAM

KEY FEATURES

•

SUPPLEMENTARY FEATURES: HAS 2 HOLES 3.750 IN. THRU WITH 0.605 IN. HIGH COLLARSATTACHED; 10 MOUNTING HOLES, 0.250 IN. DIA., 4 NEAR EACH LONG SIDE AND ONE AT CENTER OF EACH SHORT SIDE IN

•

COLOR: GRAY/GREY

•

SURFACE TREATMENT: PASSIVATE AND PRIMER AND ENAMEL

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.730 INCHES NOMINAL IN
SUPPLEMENTARY FEATURES	HAS 2 HOLES 3.750 IN. THRU WITH 0.605 IN. HIGH COLLARSATTACHED; 10 MOUNTING HOLES, 0.250 IN. DIA., 4 NEAR EACH LONG SIDE AND ONE AT CENTER OF EACH SHORT SIDE IN
OVERALL LENGTH	10.750 INCHES NOMINAL IN
OVERALL WIDTH	5.100 INCHES NOMINAL IN
COLOR	GRAY/GREY
SPECIAL FEATURES	MATL IS 0.125 THK AL ALY SH, ASTM B209, 5061-T6; FINISH IS MIL-F-14072, FINISH NO. P513.1 PLUS 2 COATS TT-E-529 IAW FED-STD-595, COLOR NO 26250 (SEMIGLOSS GRAY)
SURFACE TREATMENT	PASSIVATE AND PRIMER AND ENAMEL
END ITEM IDENTIFICATION	0A-9234(V)/G; OT-208(V)/G, TRANSMITTER GROUP A
SPECIAL MARKINGS	MARK IAW MIL-STD-130 "80063-A3273875-1 TO INCLUDE MFR CAGE CODE
MATERIAL	ALUMINUM ALLOY

OTHER ITEMS IN FSC 5975 — Electrical Hardware and Supplies

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5975-00-000-0120 5975-00-000-0126 5975-00-000-7420 5975-00-001-1397 5975-00-001-1538 5975-00-001-1539 5975-00-001-1542 5975-00-001-2444

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy A3273875-001?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is A3273875-001?

A3273875-001 is a DUCT,HPA.

What is the NSN for A3273875-001?

A3273875-001 is cataloged in the U.S. Government catalog under NSN 5975-01-531-9564. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

A3273875-001 — DUCT,HPA

Request a Quote — A3273875-001