PartsTable
Technical Data Sheet
Download PDF

A3259465-2 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A3259465-2: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, end_item_identification: MRAP - COUGAR ISS 1.0; MRAP - COUGAR ISS 1.5; MRAP - M-ATV UI. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-463-9499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A3259465-2
NSN: 5331-01-463-9499
NIINs: 014639499, 014651573
FSC: 5331 — O-ring
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
hardness_rating70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identificationMRAP - COUGAR ISS 1.0; MRAP - COUGAR ISS 1.5; MRAP - M-ATV UI
NSN5331-01-463-9499
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A3259465-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.801 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.801 INCHES NOMINAL IN
END ITEM IDENTIFICATIONMRAP - COUGAR ISS 1.0; MRAP - COUGAR ISS 1.5; MRAP - M-ATV UI
MATERIALRUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 4
40-37P1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
9HE982Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A3259465Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
10-90351-19Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy A3259465-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3259465-2?
A3259465-2 is a O-RING.
What parts can replace A3259465-2?
There are 4 known substitutes for A3259465-2: 40-37P1, 9HE982, A3259465 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A3259465-2?
A3259465-2 is cataloged in the U.S. Government catalog under NSN 5331-01-463-9499. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A3259465-2