PartsTable
Technical Data Sheet
Download PDF

A3259463 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

A3259463: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include nut_style: ROUND, nut_diameter: 0.958 INCHES NOMINAL IN, thread_class: 2B, nut_thickness: 0.193 INCHES NOMINAL IN, thread_series: UNEF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-472-8625, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A3259463
NSN: 5310-01-472-8625
FSC: 5310 — Nuts and Washers
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
nut_styleROUND
nut_diameter0.958 INCHES NOMINAL IN
thread_class2B
nut_thickness0.193 INCHES NOMINAL IN
thread_seriesUNEF
thread_directionRIGHT-HAND
drive_point_width0.130 INCHES NOMINAL IN
nominal_thread_size0.750 INCHES IN
drive_point_quantity4
thread_quantity_per_inch20
NSN5310-01-472-8625
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A3259463 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNEF
•
DRIVE POINT WIDTH: 0.130 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT DIAMETER: 0.958 INCHES NOMINAL IN
•
NUT THICKNESS: 0.193 INCHES NOMINAL IN
•
DRIVE POINT QUANTITY: 4
•
NUT STYLE: ROUND
TECHNICAL CHARACTERISTICS
THREAD SERIESUNEF
DRIVE POINT WIDTH0.130 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT DIAMETER0.958 INCHES NOMINAL IN
NUT THICKNESS0.193 INCHES NOMINAL IN
DRIVE POINT QUANTITY4
NUT STYLEROUND
THREAD CLASS2B
THREAD QUANTITY PER INCH20
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
A3259463-4Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A3259463?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3259463?
A3259463 is a NUT,PLAIN,ROUND.
What parts can replace A3259463?
There is 1 known substitute for A3259463: A3259463-4. Substitute compatibility should be verified for your specific system.
What is the NSN for A3259463?
A3259463 is cataloged in the U.S. Government catalog under NSN 5310-01-472-8625. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A3259463

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.