PartsTable
Technical Data Sheet
Download PDF

A3214-104HV 2IN — FILTER,RADIO FREQUENCY INTERFERE

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

A3214-104HV 2IN: FILTER,RADIO FREQUENCY INTERFERE.

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL OVERALL, flange_shape: ROUND WITH HOLES ALL ENDS, connection_type: FLANGE ALL ENDS, special_features: 6 PORTS, mounting_facility: BRACKET(S), nominal_thickness: 0.750 INCHES ALL ENDS IN. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-210-3475, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A3214-104HV 2IN
NSN: 4820-01-210-3475
FSC: 4820 — Valves, Nonpowered
CAGE: 09032 — TATE ANDALE, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
flange_shapeROUND WITH HOLES ALL ENDS
connection_typeFLANGE ALL ENDS
special_features6 PORTS
mounting_facilityBRACKET(S)
nominal_thickness0.750 INCHES ALL ENDS IN
bolt_hole_quantity4 ALL ENDS
flange_face_designRAISED STRAIGHT ALL ENDS
operating_pressure150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
valve_operation_methodMANUAL
nominal_outside_diameter2.000 INCHES ALL ENDS IN
bolt_hole_nominal_diameter0.750 INCHES ALL ENDS IN
NSN4820-01-210-3475
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: A3214-104HV 2IN · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE SHAPE: ROUND WITH HOLES ALL ENDS
•
FLANGE FACE DESIGN: RAISED STRAIGHT ALL ENDS
•
BOLT CIRCLE NOMINAL DIAMETER: 4.750 INCHES ALL ENDS IN
•
CONNECTION TYPE: FLANGE ALL ENDS
•
BOLT HOLE NOMINAL DIAMETER: 0.750 INCHES ALL ENDS IN
•
OPERATING PRESSURE: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
NOMINAL OUTSIDE DIAMETER: 2.000 INCHES ALL ENDS IN
•
MOUNTING FACILITY: BRACKET(S)
TECHNICAL CHARACTERISTICS
FLANGE SHAPEROUND WITH HOLES ALL ENDS
FLANGE FACE DESIGNRAISED STRAIGHT ALL ENDS
BOLT CIRCLE NOMINAL DIAMETER4.750 INCHES ALL ENDS IN
CONNECTION TYPEFLANGE ALL ENDS
BOLT HOLE NOMINAL DIAMETER0.750 INCHES ALL ENDS IN
OPERATING PRESSURE150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NOMINAL OUTSIDE DIAMETER2.000 INCHES ALL ENDS IN
MOUNTING FACILITYBRACKET(S)
BOLT HOLE QUANTITY4 ALL ENDS
SPECIAL FEATURES6 PORTS
SUBSTITUTES & CROSS-REFERENCES 3
A3214Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
A3214 ASSEMBLY A 2INReference document
Same NSN cross-reference
Reference document — Secondary reference
104HV 2INReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A3214-104HV 2IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3214-104HV 2IN?
A3214-104HV 2IN is a FILTER,RADIO FREQUENCY INTERFERE.
What parts can replace A3214-104HV 2IN?
There are 3 known substitutes for A3214-104HV 2IN: A3214, A3214 ASSEMBLY A 2IN, 104HV 2IN. Substitute compatibility should be verified for your specific system.
What is the NSN for A3214-104HV 2IN?
A3214-104HV 2IN is cataloged in the U.S. Government catalog under NSN 4820-01-210-3475. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A3214-104HV 2IN