PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A32-35
A32-35 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SPACER,SLEEVE is a the manufacturer industrial component. Key specifications include height: 0.125 INCHES NOMINAL IN, diameter: 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN, material: STEEL COMP 410 OR STEEL COMP 416 OVERALL, head_style: ROUND W/WRENCH FLATS, chamfer_length: 0.031 INCHES NOMINAL IN, hardness_rating: 88.0 ROCKWELL C MINIMUM AND 98.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-049-3688, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A32-35
NSN: 5315-00-049-3688
FSC: 5315
CAGE: 96152 — BORG-WARNER CORP MARVEL-SCHEBLER/TILLOTSON DIV (USA)
SPECIFICATIONS
height0.125 INCHES NOMINAL IN
diameter0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
materialSTEEL COMP 410 OR STEEL COMP 416 OVERALL
head_styleROUND W/WRENCH FLATS
chamfer_length0.031 INCHES NOMINAL IN
hardness_rating88.0 ROCKWELL C MINIMUM AND 98.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.041 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
under_head_length1.188 INCHES NOMINAL IN
width_across_flats0.094 INCHES NOMINAL IN
NSN5315-00-049-3688
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A32-35 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: ROUND W/WRENCH FLATS
•
CHAMFER LENGTH: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
FIRST HOLE DIAMETER: 0.062 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 410 OR STEEL COMP 416 OVERALL
•
WIDTH ACROSS FLATS: 0.094 INCHES NOMINAL IN
•
HARDNESS RATING: 88.0 ROCKWELL C MINIMUM AND 98.0 ROCKWELL C MAXIMUM OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEROUND W/WRENCH FLATS
CHAMFER LENGTH0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD ALL MATERIAL RESPONSES OVERALL
FIRST HOLE DIAMETER0.062 INCHES NOMINAL IN
MATERIALSTEEL COMP 410 OR STEEL COMP 416 OVERALL
WIDTH ACROSS FLATS0.094 INCHES NOMINAL IN
HARDNESS RATING88.0 ROCKWELL C MINIMUM AND 98.0 ROCKWELL C MAXIMUM OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
SURFACE TREATMENTPASSIVATE OVERALL
PIN HEAD DIAMETER0.041 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
8DW52ACE8Interchangeable
interchangeable cross-reference
interchangeable
22020AInterchangeable
interchangeable cross-reference
interchangeable
KS8788Interchangeable
interchangeable cross-reference
interchangeable
3235Interchangeable
interchangeable cross-reference
interchangeable
A-3235Interchangeable
interchangeable cross-reference
interchangeable
10C-0001SP ITEM 38Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A32-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A32-35?
A32-35 is a SPACER,SLEEVE.
What parts can replace A32-35?
There are 9 known substitutes for A32-35: 8DW52ACE8, 22020A, KS8788 and 6 more. Substitute compatibility should be verified for your specific system.
Is A32-35 still available?
A32-35 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A32-35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026