PartsTable
Technical Data Sheet
Download PDF

A32-2082 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A32-2082: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 0.1 RADIANS NOMINAL, first_leg_style: SQUARE, first_leg_width: 1.000 INCHES NOMINAL IN, first_leg_length: 1.250 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-503-9384, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A32-2082
NSN: 5340-01-503-9384
FSC: 5340 — Hardware, Commercial
CAGE: 03533 — CRANE CARRIER COMPANY, LLC (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle0.1 RADIANS NOMINAL
first_leg_styleSQUARE
first_leg_width1.000 INCHES NOMINAL IN
first_leg_length1.250 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width1.000 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length3.500 INCHES NOMINAL IN
mounting_hole_typePLAIN
first_leg_thickness0.125 INCHES NOMINAL IN
second_leg_thickness0.125 INCHES NOMINAL IN
NSN5340-01-503-9384
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A32-2082 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.440 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 0.1 RADIANS NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.440 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 1.000 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 3.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.440 INCHES NOMINAL IN
FIRST LEG ANGLE0.1 RADIANS NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.440 INCHES NOMINAL IN
SECOND LEG WIDTH1.000 INCHES NOMINAL IN
SECOND LEG LENGTH3.500 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
B32-2082Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A32-2082?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A32-2082?
A32-2082 is a BRACKET,ANGLE.
What parts can replace A32-2082?
There is 1 known substitute for A32-2082: B32-2082. Substitute compatibility should be verified for your specific system.
What is the NSN for A32-2082?
A32-2082 is cataloged in the U.S. Government catalog under NSN 5340-01-503-9384. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A32-2082

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.