PartsTable
Technical Data Sheet
Download PDF

A31Z13 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

A31Z13: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.059 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN, head_diameter: 0.147 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN, screw_material: STEEL, thread_direction: RIGHT-HAND, internal_drive_style: SLOT.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-467-6702, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A31Z13
NSN: 5305-00-467-6702
FSC: 5305 — Screws
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.059 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
head_diameter0.147 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
screw_materialSTEEL
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter2.2 MILLIMETERS MM
screw_surface_treatmentCADMIUM
thread_series_designatorBA
thread_pitch_in_millimeters0.43
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
screw_surface_treatment_document_and_classificationDTD904,FSCM K7766 NATIONAL SPEC SINGLE TREATMENT RESPONSE
NSN5305-00-467-6702
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: A31Z13 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
THREAD PITCH IN MILLIMETERS: 0.43
•
NOMINAL THREAD DIAMETER: 2.2 MILLIMETERS MM
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.059 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
THREAD PITCH IN MILLIMETERS0.43
NOMINAL THREAD DIAMETER2.2 MILLIMETERS MM
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
THREAD SERIES DESIGNATORBA
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A31Z13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A31Z13?
A31Z13 is a SCREW,MACHINE.
What is the NSN for A31Z13?
A31Z13 is cataloged in the U.S. Government catalog under NSN 5305-00-467-6702. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A31Z13