A31U19318-9: CABLE ASSEMBLY,RIBBON,ELECTRICAL.
CABLE ASSEMBLY,RIBBON,ELECTRICAL. Key specifications include material: COPPER AND SILVER CORE CONDUCTOR ALL CONDUCTORS, conductor_form: SOLID ALL CONDUCTORS, termination_type: CONNECTOR RECEPTACLE BOTH ENDS ALL CONDUCTORS, precious_material: GOLD AND SILVER, conductor_quantity: 25, round_conductor_size: 30 AWG ALL CONDUCTORS. This part is cataloged in the U.S.
Government catalog under NSN 5995-01-521-8633, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | COPPER AND SILVER CORE CONDUCTOR ALL CONDUCTORS |
| conductor_form | SOLID ALL CONDUCTORS |
| termination_type | CONNECTOR RECEPTACLE BOTH ENDS ALL CONDUCTORS |
| precious_material | GOLD AND SILVER |
| conductor_quantity | 25 |
| round_conductor_size | 30 AWG ALL CONDUCTORS |
| end_item_identification | WSD 39A A |
| precious_material_and_location | RECEPTACLE CONTACTS PLATED WITH .000030 INCH THICK MIN GOLD GOLD AND ALL CONDUCTORS SILVER PLATED SILVER IN |
| conductor_arrangement_and_quantity | 25 MOLDED |
| part_name_assigned_by_controlling_agency | CABLE ASSEMBLY TLC 50 OHM |
| center_to_center_distance_between_terminal_holes | 0.100 INCHES NOMINAL IN |
| NSN | 5995-01-521-8633 |
| ROUND CONDUCTOR SIZE | 30 AWG ALL CONDUCTORS |
| TERMINATION TYPE | CONNECTOR RECEPTACLE BOTH ENDS ALL CONDUCTORS |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| CONDUCTOR QUANTITY | 25 |
| CONDUCTOR FORM | SOLID ALL CONDUCTORS |
| CONDUCTOR ARRANGEMENT AND QUANTITY | 25 MOLDED |
| SPECIAL FEATURES | CONNECTOR CONTAINS STANDARD PRESSURE COPPER ALLOY RECEPTACLE CONTACTS PLATED WITH .000030 MIN INCH THICK GOLD OVER .000050 INCH MIN THICK NICKEL IN MATING AREA; P2 CONN MUST MATE AND LATCH TO AMP PART NO 1-1021258-0; P1 AND P2 CONN HOUSING SHALL BE THERMOPLASTIC; CONN SHALL BE 50 POSITION HEADER; PULL TABS SHALL BE PROVIDED; CABLE SHALL BE 50 OHM TRANSMISSION LINE CABLE; 25 SIGNAL CONDUCTORS 30 AWG SILVER PLATED COPPER; 50 GRD CONDUCTORS 32 AWG SILVER PLATED COPPER; 50 +-5 OHM IMPEDANCE; 28 PICO-FARADS PER FT NOMINAL IMPEDANCE; 14 NANOSECONDS PER FOOT PROPAGATION DELAY; PIN 1 SHALL BE CLEARLY IDENTIFIED ON CONNECTORS P1 AND P2; RESISTANCE OF CABLE ASSEMBLY SHALL BE LESS THAN .21 OHMS FOR SIGNAL CONDS AND LESS THAN .18 OHMS FOR GRND CONDS; CABLE ASSEMBLIES SAHLL BE ABLE TO WITHSTAND 300 VDC BETWEEN ANY ADJACENT SIGNAL AND/OR GRD PATHS; IMPEDANCE OF CABLE ASSEMBLY SHALL BE 50 +-5 OHMS VDC |
| CENTER TO CENTER DISTANCE BETWEEN TERMINAL HOLES | 0.100 INCHES NOMINAL IN |
| PRECIOUS MATERIAL AND LOCATION | RECEPTACLE CONTACTS PLATED WITH .000030 INCH THICK MIN GOLD GOLD AND ALL CONDUCTORS SILVER PLATED SILVER IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CABLE ASSEMBLY TLC 50 OHM |
No substitute or cross-reference records for this part.