A31U19318-13: CABLE ASSEMBLY,RIBBON,ELECTRICAL.
CABLE ASSEMBLY,RIBBON,ELECTRICAL. Key specifications include material: COPPER AND SILVER CORE CONDUCTOR ALL CONDUCTORS, conductor_form: SOLID ALL CONDUCTORS, termination_type: CONNECTOR RECEPTACLE BOTH ENDS ALL CONDUCTORS, precious_material: GOLD AND SILVER, conductor_quantity: 25, round_conductor_size: 30 AWG ALL CONDUCTORS. This part is cataloged in the U.S.
Government catalog under NSN 5995-01-521-8928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | COPPER AND SILVER CORE CONDUCTOR ALL CONDUCTORS |
| conductor_form | SOLID ALL CONDUCTORS |
| termination_type | CONNECTOR RECEPTACLE BOTH ENDS ALL CONDUCTORS |
| precious_material | GOLD AND SILVER |
| conductor_quantity | 25 |
| round_conductor_size | 30 AWG ALL CONDUCTORS |
| precious_material_and_location | .000030 INCH THICK MIN PLATING ON RECEPTACLE CONTACTS GOLD AND SIGNAL AND GRND CONDUCTORS PLATED WITH SILVER SILVER IN |
| conductor_arrangement_and_quantity | 25 MOLDED |
| part_name_assigned_by_controlling_agency | CABLE ASSEMBLY TLC 50 OHM |
| center_to_center_distance_between_terminal_holes | 0.100 INCHES NOMINAL IN |
| NSN | 5995-01-521-8928 |
| ROUND CONDUCTOR SIZE | 30 AWG ALL CONDUCTORS |
| TERMINATION TYPE | CONNECTOR RECEPTACLE BOTH ENDS ALL CONDUCTORS |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| CONDUCTOR QUANTITY | 25 |
| CONDUCTOR FORM | SOLID ALL CONDUCTORS |
| CONDUCTOR ARRANGEMENT AND QUANTITY | 25 MOLDED |
| SPECIAL FEATURES | HOUSING CONTAINS STANDARD PRESSURE COPPER ALLOY RECEPTACLE CONTACTS PLATED WITH .000030 INCH MIN THICK GOLD OVER .000050 INCH MIN THICK NICKEL IN MATING AREA; P2 CONN MUST MATE AND LATCH TO AMP PART NO 1-102158-0; P1 AND P2 CONN HOUSING SHALL BE THERMOPLASTIC; HOUSING IS A 50 POSITION HEADER; PULL TABS SHALL BE PROVIDED; CABLE SHALL BE 50 OHM TRANSMISSION LINE; 25 SIGNAL COND 30 AWG SILVER PLATED COPPER;50 GRND COND 32 AWG SILVER PLATED COPPER; 50 +-5 OHM IMPEDANCE;28 PICO-FARADS CAPACITANCE;14 NANOSECONDS PER FOOT PROPAGATION DELAY;PIN 1 SHALL BE CLEARLY IDENTIFIED ON P1 AND P2;RESISTANCE OF CABLE ASSEMBLY SHALL BE LESS THAN .21 OHMS FOR SIGNAL CONDS AND LESS THAN .18 OHMS FOR GRND CONDS;CABLE ASSEMBLIES SHALL BE ABLE TO WITHSTAND 300 VDC BETWEEN ANY ADJACENT SIGNAL AND/OR GRND PATHS; IMPEDANCE OF CABLE ASSEMBLY SHALL BE 50 +-5 OHMS; VDC |
| CENTER TO CENTER DISTANCE BETWEEN TERMINAL HOLES | 0.100 INCHES NOMINAL IN |
| PRECIOUS MATERIAL AND LOCATION | .000030 INCH THICK MIN PLATING ON RECEPTACLE CONTACTS GOLD AND SIGNAL AND GRND CONDUCTORS PLATED WITH SILVER SILVER IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CABLE ASSEMBLY TLC 50 OHM |
No substitute or cross-reference records for this part.