PartsTable
Technical Data Sheet
Download PDF

A316213-3 — THREAD PIECE,UNION

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

A316213-3: THREAD PIECE,UNION.

The THREAD PIECE,UNION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316, seat_type: STRAIGHT FACE, overall_length: 0.312 INCHES NOMINAL IN, strength_rating: ERR-060, end_connection_type: BRAZED, union_end_thread_size: 1-3/4IN-12 IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-811-9478, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A316213-3
NSN: 4730-00-811-9478
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 80020 — NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL (USA)
SPECIFICATIONS
materialSTEEL COMP 316
seat_typeSTRAIGHT FACE
overall_length0.312 INCHES NOMINAL IN
strength_ratingERR-060
end_connection_typeBRAZED
union_end_thread_size1-3/4IN-12 IN
union_end_thread_directionRIGHT-HAND
nominal_pipe_size_designation0.500 INCHES IN
working_pressure_and_service_type4000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL WATER LBS
union_end_screw_thread_series_designatorUN
NSN4730-00-811-9478
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: A316213-3 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNION END THREAD DIRECTION: RIGHT-HAND
•
NOMINAL PIPE SIZE DESIGNATION: 0.500 INCHES IN
•
STRENGTH RATING: ERR-060
•
END CONNECTION TYPE: BRAZED
•
UNION END THREAD SIZE: 1-3/4IN-12 IN
•
SEAT TYPE: STRAIGHT FACE
•
UNION END SCREW THREAD SERIES DESIGNATOR: UN
TECHNICAL CHARACTERISTICS
UNION END THREAD DIRECTIONRIGHT-HAND
NOMINAL PIPE SIZE DESIGNATION0.500 INCHES IN
STRENGTH RATINGERR-060
END CONNECTION TYPEBRAZED
UNION END THREAD SIZE1-3/4IN-12 IN
OVERALL LENGTH0.312 INCHES NOMINAL IN
SEAT TYPESTRAIGHT FACE
UNION END SCREW THREAD SERIES DESIGNATORUN
MATERIALSTEEL COMP 316
WORKING PRESSURE AND SERVICE TYPE4000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL WATER LBS
SUBSTITUTES & CROSS-REFERENCES 1
A316213Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A316213-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A316213-3?
A316213-3 is a THREAD PIECE,UNION.
What parts can replace A316213-3?
There is 1 known substitute for A316213-3: A316213. Substitute compatibility should be verified for your specific system.
What is the NSN for A316213-3?
A316213-3 is cataloged in the U.S. Government catalog under NSN 4730-00-811-9478. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A316213-3