PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A3125-4-179
A3125-4-179 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHION, overall_width: 0.750 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PHOSPHATE AND CHROMATE ZINC BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-324-6475, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A3125-4-179
NSN: 5340-00-324-6475
FSC: 5340
CAGE: 78553 — TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR CUSHION
overall_width0.750 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPHOSPHATE AND CHROMATE ZINC BAND
material_thickness0.025 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
cushioning_environmental_protectionHEAT
distance_from_loop_center_to_tongue_end1.312 INCHES NOMINAL IN
distance_from_outer_edge_of_lug_to_hole_center0.187 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.125 INCHES NOMINAL IN
NSN5340-00-324-6475
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A3125-4-179 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHION
•
SURFACE TREATMENT: PHOSPHATE AND CHROMATE ZINC BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.187 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
SURFACE TREATMENTPHOSPHATE AND CHROMATE ZINC BAND
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.750 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER0.187 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
MATERIALSTEEL BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
2235ICInterchangeable
interchangeable cross-reference
interchangeable
1179-SInterchangeable
interchangeable cross-reference
interchangeable
534972-5Interchangeable
interchangeable cross-reference
interchangeable
C7JZ-8286-AInterchangeable
interchangeable cross-reference
interchangeable
33187Interchangeable
interchangeable cross-reference
interchangeable
S9536-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A3125-4-179?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3125-4-179?
A3125-4-179 is a CLAMP,LOOP.
What parts can replace A3125-4-179?
There are 21 known substitutes for A3125-4-179: 2235IC, 1179-S, 534972-5 and 18 more. Substitute compatibility should be verified for your specific system.
Is A3125-4-179 still available?
A3125-4-179 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A3125-4-179

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026