PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A3094
A3094 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include seat_type: BALL, body_width: 0.641 INCHES MAXIMUM IN, body_height: 0.875 INCHES MAXIMUM IN, body_length: 0.766 INCHES MAXIMUM IN, seat_radius: 0.500 INCHES NOMINAL IN, inclosure_type: FULLY INCLOSED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-159-8311, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A3094
NSN: 4730-00-159-8311
FSC: 4730
CAGE: 41947 — MUELLER BRASS CO. (USA)
SPECIFICATIONS
seat_typeBALL
body_width0.641 INCHES MAXIMUM IN
body_height0.875 INCHES MAXIMUM IN
body_length0.766 INCHES MAXIMUM IN
seat_radius0.500 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_length0.340 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
flange_thickness0.160 INCHES NOMINAL IN
frequency_rating800.0 HERTZ NOMINAL SINGLE COMPONENT
overall_diameter0.620 INCHES MAXIMUM IN
special_featuresJUNCTION PATTERN ARRANGEMENT: NPN
NSN4730-00-159-8311
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: A3094 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TUBING OUTSIDE DIAMETER: 1.128 INCHES MINIMUM AND 1.131 INCHES MAXIMUM IN
•
SEAT TYPE: BALL
•
END CONNECTION TYPE: SWEAT SOLDER
•
SEAT RADIUS: 0.500 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.160 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
TUBING OUTSIDE DIAMETER1.128 INCHES MINIMUM AND 1.131 INCHES MAXIMUM IN
SEAT TYPEBALL
END CONNECTION TYPESWEAT SOLDER
SPECIAL FEATURESFITTING DESIGN 90 DEG ANGLE
SPECIAL FEATURESFITTING DESIGN 90 DEG ANGLE
SEAT TYPEBALL
SEAT RADIUS0.500 INCHES NOMINAL IN
FLANGE THICKNESS0.160 INCHES NOMINAL IN
FLANGE OUTSIDE DIAMETER1.810 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
T762Interchangeable
interchangeable cross-reference
interchangeable
A3094Interchangeable
interchangeable cross-reference
interchangeable
10557403-1Interchangeable
interchangeable cross-reference
interchangeable
RELEASE 4901Interchangeable
interchangeable cross-reference
interchangeable
6L.5512.237.00-007789Interchangeable
interchangeable cross-reference
interchangeable
2N3583Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A3094?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3094?
A3094 is a CAPACITOR,FIXED,PLASTIC DIELECTR.
What parts can replace A3094?
There are 7 known substitutes for A3094: T762, A3094, 10557403-1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A3094?
A3094 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-159-8311. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A3094

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026