PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A3049A3108
A3049A3108 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: RUBBER CUSHION, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ANODIZE BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-399-7867, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A3049A3108
NSN: 5340-00-399-7867
FSC: 5340
CAGE: 78553 — TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. (USA)
SPECIFICATIONS
diameter0.173 INCHES NOMINAL IN
materialRUBBER CUSHION
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentANODIZE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.187 INCHES NOMINAL IN
cushioning_environmental_protectionHEAT
distance_from_loop_center_to_tongue_end0.547 INCHES NOMINAL IN
surface_treatment_document_and_classificationKLI-F-1120 FSCM 82423 MFR REF SINGLE TREATMENT RESPONSE BAND
center_to_center_distance_between_loop_and_mounting_hole0.359 INCHES NOMINAL IN
NSN5340-00-399-7867
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A3049A3108 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.359 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: KLI-F-1120 FSCM 82423 MFR REF SINGLE TREATMENT RESPONSE BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.547 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM BAND
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.359 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONKLI-F-1120 FSCM 82423 MFR REF SINGLE TREATMENT RESPONSE BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.547 INCHES NOMINAL IN
MATERIALALUMINUM BAND
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.187 INCHES NOMINAL IN
DIAMETER0.173 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
REPAIR PARTUpgraded Successor
successor cross-reference
successor
20519Upgraded Successor
successor cross-reference
successor
8526085Interchangeable
interchangeable cross-reference
interchangeable
A3342Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A3049A3108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3049A3108?
A3049A3108 is a CLAMP,LOOP.
What parts can replace A3049A3108?
There are 4 known substitutes for A3049A3108: REPAIR PART, 20519, 8526085 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A3049A3108?
A3049A3108 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-399-7867. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A3049A3108

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026