PartsTable
Technical Data Sheet
Download PDF

A3044F2-92 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A3044F2-92: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN, material: RUBBER CUSHION, overall_width: 0.625 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, material_thickness: 0.016 INCHES NOMINAL IN, loop_inside_diameter: 0.313 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-141-6990, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A3044F2-92
NSN: 5340-00-141-6990
FSC: 5340 — Hardware, Commercial
CAGE: 57550 — RELLI TECHNOLOGY, INC DBA RELLI TECHNOLOGY INC (USA)
SPECIFICATIONS
diameter0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
materialRUBBER CUSHION
overall_width0.625 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
material_thickness0.016 INCHES NOMINAL IN
loop_inside_diameter0.313 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.671 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.406 INCHES NOMINAL IN
NSN5340-00-141-6990
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A3044F2-92 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DIAMETER: 0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.671 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.406 INCHES NOMINAL IN
•
MATERIAL: RUBBER CUSHION
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOROFFSET MOUNT
DIAMETER0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.671 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.406 INCHES NOMINAL IN
MATERIALRUBBER CUSHION
MATERIALALUMINUM BAND
LOOP INSIDE DIAMETER0.313 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
2-7304-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
05096-69061Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy A3044F2-92?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3044F2-92?
A3044F2-92 is a CLAMP,LOOP.
What parts can replace A3044F2-92?
There are 2 known substitutes for A3044F2-92: 2-7304-2, 05096-69061. Substitute compatibility should be verified for your specific system.
What is the NSN for A3044F2-92?
A3044F2-92 is cataloged in the U.S. Government catalog under NSN 5340-00-141-6990. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A3044F2-92