PartsTable
Technical Data Sheet
Download PDF

A3030-2 — TRAP,MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A3030-2: TRAP,MOISTURE.

The TRAP,MOISTURE is a the manufacturer industrial component. Key specifications include material: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, housing_bore_diameter: 1.983 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.188 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-141-4181, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A3030-2
NSN: 5330-00-141-4181
NIINs: 001414181, 016544736
FSC: 5330 — Packing and Gasket Materials
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT A
case_styleSQUARE
seal_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
housing_bore_diameter1.983 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.188 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-141-4181
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A3030-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.983 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.188 INCHES NOMINAL IN
•
MATERIAL: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT A
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.983 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.188 INCHES NOMINAL IN
MATERIALLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT A
SUBSTITUTES & CROSS-REFERENCES 8
49287Reference document
Same NSN cross-reference
Reference document — Secondary reference
50695Reference document
Same NSN cross-reference
Reference document — Secondary reference
A3032Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
19816Reference document
Same NSN cross-reference
Reference document — Secondary reference
450047Reference document
Same NSN cross-reference
Reference document — Secondary reference
VT2115Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A3030-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3030-2?
A3030-2 is a TRAP,MOISTURE.
What parts can replace A3030-2?
There are 8 known substitutes for A3030-2: 49287, 50695, A3032 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A3030-2?
A3030-2 is cataloged in the U.S. Government catalog under NSN 5330-00-141-4181. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A3030-2