The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 116.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM, first_leg_style: SQUARE, first_leg_width: 5.000 INCHES NOMINAL IN, first_leg_length: 7.500 INCHES NOMINAL IN, second_leg_angle: 116.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-277-5034, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
A3014549
NSN:5340-01-277-5034 FSC:5340 — Hardware, Commercial CAGE:80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 6061
first_leg_angle
116.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM
first_leg_style
SQUARE
first_leg_width
5.000 INCHES NOMINAL IN
first_leg_length
7.500 INCHES NOMINAL IN
second_leg_angle
116.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM
special_features
BOTH LEGS HAVE A 120.0 DEG TURNED EDGE; ONE 1.000 IN. DIA HOLE LOCATED ON EACH TURNED EDGE; ONE 0.344 IN. DIA HOLE LOCATED ON EACH RIB STIFFENER IN
style_designator
ADJACENT ANGLES
second_leg_length
7.500 INCHES NOMINAL IN
first_leg_thickness
0.125 INCHES NOMINAL IN
center_section_width
5.000 INCHES NOMINAL IN
second_leg_thickness
0.125 INCHES NOMINAL IN
NSN
5340-01-277-5034
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG ANGLE: 116.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM
•
CENTER SECTION THICKNESS: 0.125 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG ANGLE: 116.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM
•
SECOND LEG LENGTH: 7.500 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: NO HOLE
•
CENTER SECTION WIDTH: 5.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ADJACENT ANGLES
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE
116.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM
CENTER SECTION THICKNESS
0.125 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEG
IDENTICAL
SECOND LEG ANGLE
116.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM
SECOND LEG LENGTH
7.500 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLE
NO HOLE
CENTER SECTION WIDTH
5.000 INCHES NOMINAL IN
STYLE DESIGNATOR
ADJACENT ANGLES
FIRST LEG STYLE
SQUARE
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3014549?
A3014549 is a BRACKET,DOUBLE ANGLE.
What parts can replace A3014549?
There is 1 known substitute for A3014549: A3014549-1. Substitute compatibility should be verified for your specific system.
What is the NSN for A3014549?
A3014549 is cataloged in the U.S. Government catalog under NSN 5340-01-277-5034. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.