A3012866-2 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

A3012866-2: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: RECTANGULAR W/BUSHING, body_width: 0.500 INCHES NOMINAL IN, body_height: 0.500 INCHES NOMINAL IN, body_length: 0.875 INCHES MAXIMUM IN, flat_height: 0.219 INCHES NOMINAL IN, shaft_style: ROUND, FLATTED. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-224-9585, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ A3012866-2

NSN: 5905-01-224-9585
FSC: 5905 — Resistor
CAGE: 31550 — L3HARRIS TECHNOLOGIES, INC. DBA HARRIS CORPORATION (USA)

SPECIFICATIONS

body_style	RECTANGULAR W/BUSHING
body_width	0.500 INCHES NOMINAL IN
body_height	0.500 INCHES NOMINAL IN
body_length	0.875 INCHES MAXIMUM IN
flat_height	0.219 INCHES NOMINAL IN
shaft_style	ROUND, FLATTED
switch_type	PUSH-PULL
shaft_length	0.834 INCHES MINIMUM AND 0.896 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
cubic_measure	0.218 CUBIC INCHES
overall_length	1.896 INCHES NOMINAL IN
shaft_diameter	0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
NSN	5905-01-224-9585

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 3.00 INCH-OUNCES IN

•

OPERATING POSITION: ANY POSITION OF ROTATIONAL TRAVEL

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 10.0 KILOHMS SINGLE SECTION

•

SWITCH VOLTAGE RATING IN VOLTS: 30.0

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 120.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	3.00 INCH-OUNCES IN
OPERATING POSITION	ANY POSITION OF ROTATIONAL TRAVEL
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
SWITCH VOLTAGE RATING IN VOLTS	30.0
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	120.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
SHAFT BEARING TYPE	SLEEVE
FRAGILITY FACTOR	MODERATELY RUGGED

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 2

A3012866-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

509189-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy A3012866-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is A3012866-2?

A3012866-2 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).

What parts can replace A3012866-2?

There are 2 known substitutes for A3012866-2: A3012866-1, 509189-1. Substitute compatibility should be verified for your specific system.

What is the NSN for A3012866-2?

A3012866-2 is cataloged in the U.S. Government catalog under NSN 5905-01-224-9585. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

A3012866-2 — RESISTOR,VARIABLE,NONWIRE WOUND,

Request a Quote — A3012866-2