A3012808-105 — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

A3012808-105: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, body_height: 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, body_length: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, terminal_length: 1.250 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-324-2306, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ A3012808-105

NSN: 5910-01-324-2306
FSC: 5910 — Capacitors
CAGE: 0TCV9 — ARIZONA CAPACITORS, INC (USA)

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
body_height	0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
body_length	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
terminal_length	1.250 INCHES MINIMUM IN
terminal_diameter	0.023 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
reliability_indicator	ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
specification/standard_data	81349-MIL-C-20/35 GOVERNMENT SPECIFICATION
NSN	5910-01-324-2306

COMPONENT DIAGRAM

KEY FEATURES

•

TERMINAL DIAMETER: 0.023 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN

•

TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: 0.0 SINGLE SECTION

•

BODY STYLE: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE

•

TOLERANCE RANGE PER SECTION: -2.00 TO 2.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.250 INCHES MINIMUM IN

•

BODY WIDTH: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

TERMINAL DIAMETER	0.023 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	0.0 SINGLE SECTION
BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
TOLERANCE RANGE PER SECTION	-2.00 TO 2.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.250 INCHES MINIMUM IN
BODY WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
BODY HEIGHT	0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.001

SUBSTITUTES & CROSS-REFERENCES 5

CCR09CG182GSSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

HK-150-050-NPO-182KReference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

MIL-PRF-20/35Reference document

Same NSN cross-reference

Reference document — Identification reference

MIL-C-20/35Reference document

Same NSN cross-reference

Reference document — Secondary reference

0160-4507Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy A3012808-105?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is A3012808-105?

A3012808-105 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).

What parts can replace A3012808-105?

There are 5 known substitutes for A3012808-105: CCR09CG182GS, HK-150-050-NPO-182K, MIL-PRF-20/35 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for A3012808-105?

A3012808-105 is cataloged in the U.S. Government catalog under NSN 5910-01-324-2306. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

A3012808-105 — CAPACITOR,FIXED,CERAMIC DIELECTR

Request a Quote — A3012808-105