PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A3006700-9
A3006700-9 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC POLYAMIDE NYLON, design_type: FRICTION, overall_diameter: 0.255 INCHES NOMINAL IN, material_document_and_classification: L-P-410 6/6 FED SPEC SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-408-3360, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A3006700-9
NSN: 5340-01-408-3360
FSC: 5340
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
design_typeFRICTION
overall_diameter0.255 INCHES NOMINAL IN
material_document_and_classificationL-P-410 6/6 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-408-3360
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A3006700-9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYAMIDE NYLON
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-410 6/6 FED SPEC SINGLE MATERIAL RESPONSE
•
OVERALL DIAMETER: 0.255 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYAMIDE NYLON
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-410 6/6 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL DIAMETER0.255 INCHES NOMINAL IN
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
8306-18Interchangeable
interchangeable cross-reference
interchangeable
755002A7671-18Interchangeable
interchangeable cross-reference
interchangeable
23076Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A3006700-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3006700-9?
A3006700-9 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace A3006700-9?
There are 3 known substitutes for A3006700-9: 8306-18, 755002A7671-18, 23076. Substitute compatibility should be verified for your specific system.
What is the NSN for A3006700-9?
A3006700-9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-408-3360. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A3006700-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026